| ● Power module | ※ Programmable constant voltage and constant current source ※ |
| Input voltage | 220V AC 50Hz |
| Output voltage range | 100~1000V |
| Output current range | 0~2A |
| Maximum output power | 2000W |
| Power module voltage setting/readback accuracy | ± 2%, ± 5dgt (set value=charging and discharging set voltage, the readback value can be viewed when the internal parameters are turned on) |
| ● Charging module | ※Constant current charging module※ |
| Constant current charging range | 0~1000V |
| ●Discharge module | ※Electronic load※ |
| Pulse carrying current range | 0~1000A (theoretical value, actual value needs to be calculated based on dv/dt) |
| Charge and discharge parameters (user specific parameters) | ※ |
| Discharge mode | Constant current discharge of electronic load (approximate short-circuit discharge) |
| Trigger | Inside/PLC/232/485 |
| Voltage | 100~1000V |
| Measurement timing (single product measurement time) | 0.1S~3.0S, time accuracy 1% |
| Test frequency (charge discharge frequency) | 250Hz /500Hz /1000Hz |
| Discharge current setting | 100A~1600A (only represents the ideal discharge current setting value for the internal circuit, as the tested component is a capacitor, the actual value is related to the capacitor voltage, capacitor capacity, and capacitor characteristics) |
| Capacitance capacity | 10nF~22000nF, this parameter needs to be set by the user |
| External inductance | Not connected to an inductor |
| Open circuit detection | Sample the discharge current, and if the sampled value is particularly small, determine an open circuit |
| Charging undervoltage detection | Internal module constant current discharge, no resistance required |
| Over temperature detection | Yes |
| Interface | RS232/RS485/handler interface (for connecting to PLC) |
| Programming language | SCPI and Modbus（RTU） |
| Power Supply | 200V-240VAC |
| Power | Max:2200VA |
| Weight | 29kg |