| ● Power module | ※ Programmable constant voltage and constant current source ※ |
| Input voltage | 380V AC 50Hz |
| Output voltage range | 100~1200V(This parameter is for reference only and can be customized according to requirements) |
| Output current range | 10A |
| Maximum output power | 12000W |
| Power module voltage setting/readback accuracy | ± 2%, ± 5dgt (set value=charging and discharging set voltage, the readback value can be viewed when the internal parameters are turned on) |
| ● Charging module | ※ Constant current charging module ※ |
| Constant current charging range | About 9A |
| ●Discharge module | Electronic load |
| Pulse carrying current range | MAX 3200A (theoretical value, actual value depends on external inductance and measured capacitance, internal 3200A current limitation of the instrument can reduce the damage rate of misoperation) |
| Charge and discharge parameters (user specific parameters) | ※ |
| Discharge mode | External inductor discharge |
| Trigger | Internal/PLC/232/485 |
| Voltage | 100~1200V |
| Measurement timing (single product measurement time) | 1~1200 |
| Test frequency (charge discharge frequency) | 1Hz ~200Hz |
| Discharge current setting | Internal fixed limit MAX 3200A (theoretical value, actual value depends on external inductance and measured capacitance, internal 3200A current limit of the instrument can reduce the damage rate of misoperation) |
| Capacitance capacity | 20μF~300μF, this parameter needs to be set by the user according to the actual situation |
| External inductance | 12μH~100μH, this parameter needs to be set by the user according to the actual situation |
| Open circuit detection | Sample the discharge current, and if the sampled value is particularly small, determine an open circuit |
| Charging undervoltage detection | Yes, it can detect incorrect products and avoid damaging the instrument in case of timing errors on the machine |
| Over temperature detection | Yes |
| Interface | RS232/RS485/handler interface (for connecting to PLC) |
| Programming language | SCPI and Modbus（RTU） |
| Power Supply | Three phase five wire |
| Power | Maximum 12000W |
| Weight | 100kg |